UNECE FFV-28 — Sweet Peppers Inspection Report
Class II

Inspection Details

Date
25/06/2026
Inspector
Jean Dupont
Time
10:30
Location
Rotterdam Port Terminal
Temperature (°C)
10.7 °C
Batch / Lot Code
BT260625-231B
Best Before
08/07/2026
Lot Size
360
Packages Sampled
14

Product Identification

Produce
Sweet Peppers
Variety / Cultivar
Test Variety C

Origin & Packer

Country of Origin
Portugal
Region / District
Murcia
Packer / Dispatcher
Mediterranean Export SL
Address
12 Export Road Murcia

Classification

Quality Class
Class II

Minimum Requirements — §II-A

Intact
Sound
Free from rot or deterioration
Clean
No visible foreign matter
Fresh in appearance
Firm
Sweet peppers must be firm (FFV-28 §II-A)
Practically free from pests
Free from pest damage to flesh
Free from frost / low temperature damage
Peduncle attached, neatly cut; calyx intact
Required per FFV-28 §II-A
Free from abnormal external moisture
Free from foreign smell / taste

Quality Defects — §II-B

No quality defects observed
Shape / development defect
Not observed
Class I: slight; Class II: defects allowed
Colouring defect
Not observed
Insufficient or uneven colouring
Skin defect (pitting, scratching, sunburn, pressure marks)
Not observed
Class I: ≤2 cm elongated / ≤1 cm² other; Class II: ≤4 cm elongated / ≤2.5 cm² other
Bruises
Not observed
Healed / dry superficial cracks
Not observed
Class I: ≤1/8 total surface; Class II: ≤1/4 total surface
Unhealed / open cracks
Not observed
Not permitted in Extra or Class I
Silvering or damage caused by thrips
Not observed
Class I: ≤1/3 total surface; Class II: ≤2/3 total surface
Blossom end deterioration
Not observed
Class II only: ≤1 cm²
Shrivelling
Not observed
Class II only: not exceeding 1/3 of the surface
Damaged peduncle / calyx
Not observed
Class I: slightly damaged peduncle. Class II: damaged peduncle/calyx if surrounding flesh intact

Sizing — §III

Method
By Equatorial Diameter (mm)
Min Ø
76 mm
Max Ø
106 mm
Allowed range
≤20 mm between smallest and largest (FFV-28 §III)

Tolerances — §IV

10.0%
Quality Tolerance
10.0%
Size Tolerance

Packaging & Marking — §V–VI

Contents Uniform
Yes
Packaging Material
Wooden crates
Official Control Mark
Present

Inspection Notes

Inspection standard effectuée.