UNECE FFV-59 — Root and Tubercle Vegetables Inspection Report
Extra

Inspection Details

Date
25/06/2026
Inspector
Jean Dupont
Time
14:30
Location
Rotterdam Port Terminal
Temperature (°C)
5.1 °C
Batch / Lot Code
BT260625-A98B
Best Before
12/07/2026
Lot Size
360
Packages Sampled
11

Product Identification

Species / Produce Type
Variety / Cultivar
Test Variety D
Region / District
Provence

Origin & Packer

Country of Origin
Spain
Region / District
Provence
Packer / Dispatcher
Mediterranean Export SL
Address
12 Export Road Provence

Classification — §II-B

Quality Class
Extra

Minimum Requirements — §II-A

Intact
Clean cuts of tip/lateral roots not a defect; fractured roots excluded
Sound
Free from rot or deterioration
Clean
Washed: free from visible foreign matter; unwashed: free from serious dirt
Fresh in appearance and firm
Practically free from pests
Free from pest damage to flesh
Free from abnormal external moisture
Free from foreign smell / taste

Where produce is presented with leaves, the leaves must be sound, fresh and clean. Where presented without leaves, they must be neatly cut at the top of the root (FFV-59 §II-A).

Quality Defects — §II-B

No quality defects observed
Shape / Development defect
Not observed
Colouring defect (skin)
Not observed
Insufficient or uneven colouring of skin
Skin defect
Not observed
Healed cuts, scars, roughness
Bruising / damage removable by peeling
Not observed
Healed cracks
Not observed
Class I: slight only. Class II: not reaching core (kohlrabi: ≤1 cm deep)
Unhealed / open cracks
Not observed
Excluded from all classes
Forked / two tips
Not observed
One fork (two tips) permitted in Class II only
Secondary root growth
Not observed
Significant lateral or secondary roots — not permitted
Hollow
Not observed
Internal hollow cavity — not permitted
Woody / fibrous / spongy
Not observed
Flesh texture defect — not permitted
Flesh discolouration (grey / black streaks)
Not observed
Not permitted (FFV-59 §II-A)

Sizing (Voluntary) — §III

Note: FFV-59 §III states there is no sizing requirement. Data below reflects voluntary sizing applied to this lot.

Method
By Diameter (mm)
Min Ø
71 mm
Max Ø
101 mm
Min Weight
151.0 g
Max Weight
351.0 g

Tolerances — §IV

5.0%
Quality Tolerance
Class I & II: max 10% by number or weight; within that, max 1% (Class I) / 2% (Class II) affected by decay (FFV-59 §IV).
10.0%
Size Tolerance
Applicable only where voluntary sizing was applied.

Packaging & Marking — §V–VI

Contents Uniform
Yes
Packaging Material
Wooden crates
Official Control Mark
Present

Inspection Notes

Inspection standard effectuée.